ImageGreetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...

Would 9.5" Rota Grids fit an Altezza ?

Anything related to bodykits, wheels lights & other exterior things, post here
tdi-red di
Noob!
Posts: 18
Joined: Mon Feb 04, 2013 6:55 pm
Location: Connemara, Galway

Would 9.5" Rota Grids fit an Altezza ?

Postby tdi-red di » Thu Jun 18, 2015 5:44 pm

As above, I'm assuming the arches will have to be rolled...will she be OK sitting on 55mn springs and 8" Rota Grids (front) and 9.5" (rear)...?

Thanks
**** Looking for anyone who can program vw clocks, Galway preferably :) ****

User avatar
donato
Trc Off
Posts: 75
Joined: Wed Nov 12, 2014 9:53 pm
Location: Bolton

Re: Would 9.5" Rota Grids fit an Altezza ?

Postby donato » Fri Jun 19, 2015 8:38 am

More than likely, but it will depend on what offset and tyres you'll be using.

tommysheen
Trc Off
Posts: 75
Joined: Tue Aug 03, 2010 3:33 pm

Re: Would 9.5" Rota Grids fit an Altezza ?

Postby tommysheen » Fri Jun 19, 2015 10:38 am

As said above. Offset and are they 17s or 18s. Roll the lip and stretch the tyres

wenguin
Trc On!
Posts: 58
Joined: Wed Apr 29, 2015 10:12 pm

Re: Would 9.5" Rota Grids fit an Altezza ?

Postby wenguin » Wed Jul 01, 2015 10:02 pm

I run 17" ET38 9J with 235/40 tyres on the rear and there is slight poke from the fender, and arch clipping so you'd almost definitely need to roll arches.

I'd personally just get less-wide wheels.


Return to “Visual & Exterior section”

Who is online

Users browsing this forum: No registered users and 2 guests

cron