Greetings! Welcome to Tezzaworld website, unfortunately you are a few years late to the show as nearly everyone has been and gone, there is still lots of useful archived material to read through, not many active users unfortunately, but that’s the way it goes, hopefully you are not too disappointed...
Tools Needed:
Socket Wrench
10mm Socket
Step One:
You have to pull these black push screws...just slip something behind the carpet and pull down, they make a tool for this type of stuff, and I have it and used it, but forgot to get a pic of it...maybe I will get it tomorrow
Step Two:
Pull the carpet covering off the trunk and from around the trunk release. Just give it a good pull, it will come off
Step Three:
Look at the light, its right there.
Step Four:
Remove the bolt, its a 10mm. And notice the plastic tabs just behind the screw.
Step Five:
Pinch tabs together and push up on the light...it will pop out.
Step Six:
Your light is now out, you are free to change the bulb, install your new clear/smoked lenses, or just leave them off completely and look stupid with holes in your trunk.
Reverse these steps to reinstall
