Page 1 of 1

Code P1354

Posted: Thu Apr 26, 2018 7:45 am
by Cathalsully-Tez
Hi my car seems to be running weird so looking for help yet again, got my obd port working so was able read codes and got p1354 vvt solenoid, had 2 spare out of my old engine and changed them out but problem is still there, if I delete codes the car will run perfect for a good 2 miles until the eml will come on again and goes off itself each time then the car is down on power and at 2000rpm there a little dead spot/shutter... anyone come across it been like this before have seen other posts with this code but changing the solenoid Normally fixes it for them...

Re: Code P1354

Posted: Fri Apr 27, 2018 1:25 pm
by RS Tom-Hundred
Presumably, once the EML comes back on and the rough running occurs, the original error code comes back?

Re: Code P1354

Posted: Fri Apr 27, 2018 11:02 pm
by Cathalsully-Tez
Yes once I clear codes and drive the car for a bit the eml will come on turn off after 30 seconds or so and when I read it again it’s the orginal p1354 code again each time, took it for a good drive today 200 miles or so, and drives great only for this it’s like as if the car is going into limp mode once the light comes on,