Lightweight fly wheel or no?

Post info/questions on engine mods and issues here
User avatar
Tezza Fanatic!
Posts: 324
Joined: Sat Jun 27, 2009 11:39 am
Location: leicester england

Lightweight fly wheel or no?

Postby m_0_m_0 » Mon Oct 16, 2017 4:16 pm

Hi Guys,

wanted some feedback on going for a lightweight flywheel or sticking to the original? can anyone advise what the best option is? pro's and cons?

cars was losing fluid took it in to find out the gearbox needed to be taken out to check the pipes behind, which need replacing and while i was at it i thought i'd change the clutch and flywheel, so your wisdom is much welcomed.



Trc Off
Posts: 77
Joined: Tue Aug 03, 2010 3:33 pm

Re: Lightweight fly wheel or no?

Postby tommysheen » Wed Oct 18, 2017 1:34 pm

If your changing it anyway then go for the light weight. Pros; quicker rev better throttle response Cons; may cause slightly lumpy idle nothing that most people would notice. A little less easy to pull away from a stop but that's something you'd get used to after some use. Probably won't notice much difference.

For short answer Yes get a light weight one

User avatar
RS Tom-Hundred
Tezza Fanatic!
Posts: 480
Joined: Fri Nov 28, 2014 3:31 pm
Location: Cambridgeshire

Re: Lightweight fly wheel or no?

Postby RS Tom-Hundred » Thu Nov 23, 2017 11:26 am

I have got nothing to compare to as when I got the car it already had the lightweight flywheel on but I love the way it is with it fitted and it's my daily and it doesn't make it hard to drive or anything.

The previous owner included a box of parts and in it was the original dual mass flywheel. When I had my engine oyut and the lightweight flywheel off I quickly weighed both and although I've forgotten the exact numbers, it was nearly half the weight (dual mass was 13.something kg and lightweight was 7.something kg I think)

Return to “Engine & Transmission section”

Who is online

Users browsing this forum: No registered users and 1 guest